Se-Kure Controls LE PLUS Instruções de Operação descarregar pdf (Página 19)

Se-Kure Controls,

Inc.

3714 Runge Street • Franklin Park, IL 60131 • 1-(800) 322-2435 • (847) 288-1111 • Fax: (847) 288-9999

Inc.

SK-195

AC/DC Power Supply

SK-403/961C

Alarm Module w/Coiled Ant Sensor

Final Assembly & Operating Instructions:

Plug the AC/DC Power Supply into any standard 110v AC outlet, and the mini connector

into the back of the Alarm Module. (Make sure the key is in the (clockwise) Stand-By

Position).

The sensor m

ust be securely attached so the plunger on the sensor is

depressed.

• If the Alarm sounds during the stallation, check the sensor to make sure that the

plunger on the sensor is placed against a solid flat surface on the merachandise.

Arm the System

• With light RED and properly attached, turn the key (counterclockwise) and

remove the key to arm the system. (Put the key in a safe location).

Re-Arming the System After An Alarm

• After an alarm has been set off, insert the key in the Alarm Module and turn the key

(clockwise) to the Stand-By position.

• Clean & Dry the Ant Sensor and the area on the product where it is to be attached.

• Apply the sensor to the merchandise with a new SK-909 Ant Sensor Adhesive.

• If the sensor cable has been cut or damaged, call your Se-Kure Controls Customer

Service Representative for repair service.

Battery Testing

• Unplug the AC/DC Power Supply from the Alarm Module,

and press the “Battery Test Button.

• If the horn sounds, the batteries are ok.

• If the horn does not sound, or is weak, replace the

(2) 9V Alkaline Batteries.

1 2 ... 14 15 16 17 18 19

Sem comentários

Se-Kure Controls LE PLUS Instruções de Operação Página 19